Idle Lens

IdleLens

Give idle players a cinematic camera. IdleLens is a lightweight, server-side AFK camera mod for NeoForge.

Highlights

• Server-side only: works with unmodified vanilla clients
• 32 built-in scenes: 26 locked-off compositions and 6 radial zooms
• Smooth zoom in and zoom out using smootherstep ease-in-out motion
• Coherent handheld sway
• AFK timer and exit hint in the vanilla action bar
• Collision, world-border, movement, dimension, portal, and lifecycle safety checks
• Stops cinematics automatically when server TPS falls below a configurable threshold
• Uses Spark's rolling 5-second TPS when available, with a built-in fallback

Camera behavior

Scenes end with a hard cut after the camera reaches a stationary endpoint. Camera sway fades in and out around the base pose and does not recalculate the viewing rotation.

The action bar displays the cumulative AFK time:

AFK 02:18  •  Left-click or Scroll to exit AFK

Movement, interaction, scrolling the hotbar, or other detected activity restores the normal player camera.

Requirements

Configuration

Idle Lens generates config/idlelens-server.toml.

The default configuration starts a cinematic after 2 minutes without activity.
Common settings:

[general]
enabled = true
idleSeconds = 120
cooldownSeconds = 10
maxConcurrentCinematics = 16
stopBelowTps = 15.0
exitHint = "Left-click or Scroll to exit AFK"

[camera]
minimumRadius = 1.5
maximumRadius = 7.0
minimumHeight = 0.25
maximumHeight = 4.0
sceneSpeed = 1.0
handheldIntensity = 1.0
handheldSpeed = 1.0
collisionCheck = true

Useful details:

• Set exitHint = "" to hide the exit instruction.
• Set stopBelowTps = 0 to disable the TPS safety check.
• Spark is recommended for its rolling 5-second TPS measurement. Without Spark, IdleLens remains fully functional and uses Minecraft's built-in average tick time as a fallback.
• An empty allowedDimensions list permits cinematics in every dimension.
• maxConcurrentCinematics limits simultaneous camera anchors and packet work.
• Radius and height limits are normalized safely when their minimum and maximum values are reversed.
• Existing configs keep their saved values. Change the old exit hint manually if the file was generated by an earlier version.

Scene selection

The default scene list accepts exact names and prefixes:

[scenes]
enabled = [
    "right_profile",
    "wide_orbit",
    "front_close",
    "rear_shoulder",
    "low_hero",
    "wide_reveal"
]

For example, wide_reveal enables its overhead, below-player, profile, and zoom variants. An empty list or a list with no matching scenes falls back to a safe built-in scene.

Elevated and low-angle static shots have higher default selection weights. Horizontal portraits remain available at lower weights. All six zoom scenes remain enabled by their matching prefixes.

Safety

IdleLens refuses to start a cinematic when the player is dead, sleeping, riding, falling, swimming, inside a portal, moving, or outside the configured dimension rules. Optional checks can also block cinematics near hostile mobs.

During an active cinematic:

• Movement and unsafe displacement always restore the normal camera.
• Death, portal entry, dimension changes, logout, and server shutdown always restore or discard the camera anchor.
• Rotation, damage, vehicle use, and sleep follow their respective cancellation settings.
• Collision checks raycast from the focus point and keep the camera outside solid blocks and fluids.
• A low-TPS stop uses Spark when installed and falls back automatically when it is absent or its API is not ready.

Commands

All commands require permission level 2.

FAQ

Do players need to install IdleLens?
No. Install it only on the NeoForge server.

Is Spark required?
No. Spark is optional but recommended for better low-TPS detection. IdleLens uses its built-in fallback when Spark is not installed.

Does IdleLens change the player's game mode or position?
No. It changes only the camera target and restores the player camera when the session ends.

How does a player exit AFK mode?
Left-click, scroll the hotbar, move, interact, or perform another detected activity. The action-bar instruction can be changed or hidden in the config.

Why did a cinematic not start?
The player may be in an unsafe state, outside the allowed dimensions, near a hostile mob when that check is enabled, or the server may have reached its session limit. Low server TPS can also stop cinematics.